PLANET MC-1610MR - Manual (Page 22)

4. CONSOLE INTERFACE
4.1 CONNECT TO PC
RS-232 serial cable
Use the bundled RS-232 serial cable and attach the 9-pin female connector to the male connector on the Managed Media
Converter Chassis. Plug the other side of this cable to your PC.
Hyper Terminal
In Windows 98/2000/ME/XP, launch “HyperTerminal”, create a new connection, and adjust settings as below:
ƒ Emulation: VT-100 compatible
ƒ Baud per second: 38400
ƒ Data bits: 8
ƒ Parity: None
ƒ Stop bits: 1
ƒ Flow Control: None
To gain a demo, please see the Figure 4-1 .
Figure 4-1 Port Settings for console interface
22