PLANET MC-1610MR - Manual (Page 12)

2.3 Managed Media Converter Chassis Installation
The chapter describes how to install optional FST-8 / GST-7 / GST-8 series Fast / Gigabit Ethernet Smart Media converter into
your Managed Media Converter Chassis, please read the following topics and perform the procedures in the order being
presented.
To install your Managed Media Converter Chassis on a desktop or shelf, simply complete the following steps.
2.3.1 Desktop Installation
To install a Managed Media Converter Chassis on a desktop or shelf, simply completed the following steps:
Step 1: Attached the rubber feet to the recessed areas on the bottom of the Managed Media Converter
Chassis.
Step 2: Place the Managed Media Converter Chassis on a desktop or shelf near an AC/DC power source.
Step 3: Keep enough ventilation space between the Managed Media Converter Chassis and the surrounding
objects.
#
Notice:
When choosing a location, please keep in mind the environmental restrictions discussed in Chapter
1, Section 5, Specification.
Step 4: Connect your Managed Media Converter Chassis to network administrator stations.
A. Connect one end of a standard network cable to the 10/100 RJ-45 port on the management module front panel of
the Managed Media Converter Chassis.
B. Start to manage the Managed Media Converter Chassis through the Microsoft Internet Explorer and etc.
#
Notice: Connection to the Managed Media Converter Chassis requires UTP Category 5 network cabling
with RJ-45 tips. For more information, please see the Cabling Specification in Appendix A.
Step 5: Supply power to the Managed Media Converter Chassis.
A. Connect one end of the power cable to the Managed Media Converter Chassis.
B. Connect the power plug of the power cable to a standard wall outlet then power on the Managed Media Converter
Chassis.
When the Managed Media Converter Chassis receives power, the Power LED should remain solid Green.
12