PLANET WDAP-C7400 - Manual (Page 31)

User Manual of WDAP-C7400
-23-
5.3 Wireless
The Wireless menu contains submenus of the settings about wireless network. Please refer to the following
sections for the details.
5.3.1 Basic – 2.4GHz
Choose menu “Wireless  Basic”, and you can configure the basic settings for the wireless network on this
page. After configuration is done, please click the “OK” button to save the settings.
Figure 5-7 Wireless Basic Settings – 2.4GHz
The page includes the following fields:
Object Description
 Select Wireless
Network:
Select one of the Multiple-SSID for the network configuration.
There are max. 8 SSID supported.
※ Any settings modified in this page will be applied to all SSIDs.
 Wireless:
Click “Enable” to enable the wireless signal.
 SSID Broadcast: When you select “Disable SSID broadcast”, AP will not broadcast its own
SSID. If there is a wireless connection request, you need to input SSID
manually.
 AP Isolation The access control feature based on wireless MAC address.
When this feature is enabled, each of your wireless clients will be in its own
virtual network and will not be able to communicate with each other. This
feature is to isolate the communication of wireless clients connected with a