PLANET WDAP-C7400 - Manual (Page 39)

User Manual of WDAP-C7400
-31-
5.3.5 Universal Repeater
Choose menu “Wireless  Universal Repeater”. You can repeat the wireless signal of the root AP with the
WDAP-C7400. After the configuration is done, please click the “OK” button to save the settings.
Figure 5-13 Universal Repeater Settings
The page includes the following fields:
Object Description
 Universal
Repeater
Mode:
Select “Enable” to enable the Universal Repeater mode.
 Interface:
Select “2.4G” or “5G” interface for the Universal Repeater connection.
 SSID:
The current SSID. Once selected the root AP, the SSID will became to the SSID
of root AP’s.
 MAC
 Address:
Enter the MAC address of the root AP that you want to associate to.
Channel:
Select the channel that the same with the root AP’s.
Security Mode:
Configure the security setting that the same with the root AP’s.
1. If you already know root AP’s MAC address, then you can manually enter it on WDAP-C7400 and click “OK”.
2. Or you can use the Enable Scan option.
1) Click the “Enable Scan” button to search and select root AP’s SSID, confirm in the appearing dialogue box
and then click “OK”. Root AP’s MAC address will be added automatically.