PLANET WDAP-1750AC - Manual (Page 51)

User Manual of WDAP-1750AC
-43-
Auto Channel
Interval
Specify a frequency for how often the auto channel setting will check/reassign
the wireless channel.
Check/uncheck the “Change channel even if clients are connected” box
according to your preference.
Channel
Bandwidth
Set the channel bandwidth:
 20MHz (lower performance but less interference)
 Auto 40/20MHz
 Auto 80/40/20MHz (automatically select based on interference level).
BSS Basic Rate
Set
Set a Basic Service Set (BSS) rate: this is the transmission rate for controlling
communication frames for wireless clients.
When auto channel is disabled, select a wireless channel manually:
Object Description
Channel Interval Select a wireless channel.
Channel
Bandwidth
Set the channel bandwidth:
 20MHz (lower performance but less interference)
 Auto 40/20MHz
 Auto 80/40/20MHz (automatically select based on interference level).
BSS Basic Rate
Set
Set a Basic Service Set (BSS) rate: this is the transmission rate for controlling
communication frames for wireless clients.
5.3.6 Advanced
These settings are for experienced users only. Please do not change any of the values on this page unless you
are already familiar with these functions.