PLANET WL-U356A - Manual (Page 27)

23
Default Key ID Select which of the four Key Values you want to use.
Key Format
Select either Hexadecimal (0-9, A-F) or ASCII (any number or
letter).
Key Value
Enter the applicable key values. Up to four key values may be
entered. Note the following rules when entering Key values:
• 64-bit key length requires 10 Hexadecimal characters (0-9,
A-F) or 5 ASCII characters (any number or letter).
• 128-bit key length requires 26 Hexadecimal characters (0-9,
A-F) or 13 ASCII characters (any number or letter).
• 256-bit key length requires 58 Hexadecimal characters (0-9,
A-F) or 19 ASCII characters (any number of letter).
Apply Save current settings.
4.3 Configuring MAC Address Filter
Parameters
Description
Filter Type
Disable: disables MAC address filter.
Accept: only accepts connection from the MAC address listed.
(Connection attempts from MAC address not in the list will be
rejected).
Reject: only rejects connection from the MAC address listed.
(Connection attempts from MAC address not in the list will be
accepted, provided the client matches the encryption settings
as well).
Apply Click to save the changes.