PLANET WNAP-7200 - Manual (Page 30)

Advanced Wireless
Beacon Interval:
The interval time range is between 20ms and 999ms for each beacon transmission. The
default value is 100ms.
Date Beacon Rate (DTM):
The DTM range is between 1 ms and 255 ms. The default value is 1ms.
Fragment Threshold:
This is the maximum data fragment size (between 256 bytes and 2346 bytes) that can be
sent in the wireless network before the router fragments the packet into smaller data frames.
The default value is 2346.
RTS Threshold:
Request to send (RTS) is designed to prevent collisions due to hidden node. A RTS defines
the biggest size data frame you can send before a RTS handshake invoked. The RTS
threshold value is between 1 and 2347. The default value is 2347.
If the RTS threshold value is greater than the fragment threshold value, the RTS handshake
does not occur. Because the data frames are fragmented before they reach the RTS size.
Tx Power:
The Tx Power range is between 1 and 100. The default value is 100.
Short Preamble:
Select Disable or Enable.
Short Slot:
Select Disable or Enable.
Tx Burst:
Select Disable or Enable.
Pkt_Aggregate:
Select Disable or Enable.
Country Code:
Select the region which area you are. It provides six regions in the drop-down list.
Wi-Fi Multimedia
WMM Capable:
Enable or disable WMM.
APSD Capable:
Enable or disable APSD.
WMM Parameter:
Click WMM Configuration button to pop up WMM Parameters of Access Point page. You
can configure WMM parameters in the page.
30