PLANET WNAP-7350 - Manual (Page 13)

User Manual of WNAP-7350
-6-
1.3 Product Features
 Industrial Compliant Wireless LAN & LAN
 Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps data rate
 Backward compatible with 802.11a standard
 Equipped with 10/100Mbps RJ-45 Ports for LAN & WAN, Auto MDI/ MDI-X supported
 Fixed-network Broadband Router
 Supported connection types: Dynamic IP / Static IP / PPPoE / PPTP / L2TP / IPSec
 Supports Virtual Server, DMZ for various networking applications
 Supports DHCP Server, UPnP, Dynamic DNS
 RF Interface Characteristics
 Built-in two N-Type Female Antenna connectors
 High Output Power up to 500mW with multiple adjustable transmit power control
 Outdoor Environmental Characteristics
 Aluminum Housing, IP67 Protection Grade
 IEEE 802.3af/at Power over Ethernet design
 Operating Temperature: -30~75 degrees C
 Multiple Operation & Wireless Mode
 Multiple Operation Modes: Bridge, Gateway, WISP
 Multiple Wireless Modes: AP, Client CPE (WISP), WDS PtP, WDS PtMP, Repeater
 Supports Dual-SSID allowing users to access different networks through one single AP
 Supports WMM (Wi-Fi Multimedia)
 Secure Network Connection
 Supports Software Wi-Fi Protected Setup (WPS)
 Advanced security: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK (TKIP/AES), and
802.1x Authentication
 Supports NAT firewall features with SPI function to protect against DoS attacks
 Supports IP/Protocol-based access control and MAC filtering
 Easy Installation & Management
 Web-based UI and Quick Setup Wizard for easy configuration
 Remote Management allows configuration from a remote site
 SNMP-Based management interface
 System status monitoring includes DHCP Client, System Log