PLANET WRT-416 - Manual (Page 21)

Chapter 5 Web Configuration
5.1 Web Login
The wireless router supplies the function of act as two AP simultaneously, but because the difference of
privilege, besides normal function of AP, the primary AP also has extra function for some advanced settings
and right management. So here you can manage and configure your primary AP.
z Disable Wireless LAN Interface
Click it will disable your Wireless LAN Interface. The Wireless Interface default is Enable.
z Band
It allows you to set the AP fix at 802.11b or 802.11g mode. You also can select B+G mode to allow the
AP select 802.11b and 802.11g connection automatically.
z Mode
It allows you to set the Wireless mode to AP, Client, WDS or AP+WDS mode. The default is AP mode.
z Network Type
There are two type, infrastructure and hoc, the default is infrastructure
z SSID
This is the name of the wireless LAN. All the devices in the same wireless LAN should have the same
SSID, the default SSID is default.
z Channel Number
The channel used by the wireless LAN. All devices in the same wireless LAN should use the same
channel.