PLANET NVR-3280 - Manual (Page 23)

32-Channel Rack Mount Network Video Recorder with 8-bay Hard Disks
NVR-3280
4.2 Retrieve camera’s status
The camera list can show each camera’s current status. Each status is represented with different
colors and their meanings are explained on the right.
Blue Camera is connected
Gray Camera is NOT connected
Red Camera is currently performing recording
Green Recording (manual/continuous/schedule)
White This channel is not configured with any camera
4.3 Perform Sequence Viewing
Sequence viewing is a function that allows you to view multiple video streams from certain cameras in
sequence automatically without having to select them one by one. To perform sequence viewing, select
“Sequence” from the upper-left hand corner. Next, select one or more camera(s) or camera group(s) for
sequence viewing.
Select "1-16" or "17-32" to start sequence viewing of 16 or 32 videos.
Select "Group(x)" to start sequence viewing in quad view.
Select "cameras" to start sequence viewing in single video view.
Then select dwell interval from the drop-down menu
Finally click “Start” to start sequence viewing.
Click “All Channels” to quickly select all available channels and start sequence viewing in the single-
view mode.
Click “All Groups” to quickly select all available groups and start sequence viewing in the quad-view
mode.
Or simply select the desired channels and press “Start” to start sequence viewing.
4.4 PTZ Control
PTZ control provides functions to pan, tilt, and zoom a PTZ camera as well as the ability to adjust
camera focus and iris.
23