PLANET VIP-362WT - Manual (Page 26)

802.11n Wireless SIP IP Phone
VIP-362WT
26
Chapter 5
SIP Account Setting
SIP Account
SIP is a request-response protocol, dealing with requests from clients and responses from servers.
Participants are identified by SIP URLs. Requests can be sent through any transport protocol. SIP
establishes call parameters at either end of the communication, and handles call transfer and
termination.
SIP setting
Set your SIP server in the following interface. These parameters are related to registration and call.
Item Descriptions
SIP T1 RFC 3261 T1 value (RTT estimate), which can range from 0 to 64 second.
Defaults to .5 seconds
Max forward
SIP Max Forward value, which can range from 1 to 255. Defaults to 70.
SIP Reg User Agent
Name
User-Agent name to be used in a REGISTER request.
If this is not specified, the <SIP User Agent Name> is also used for the RE
GISTER request. Defaults to blank
5