ProSoft Technology MVI69E-MBTCP - Manual (Page 89)

MVI69E-MBTCP ♦ CompactLogix Platform Using Controller Tags
Modbus TCP/IP Enhanced Communication Module User Manual
ProSoft Technology, Inc. Page 89 of 150
May 20, 2015
0 = Disable, 1 = Enable
MBTCP.STATUS.GeneralStatus.
Client1to19CmdExecutionWord Each bit in each of the 19 words is used to enable/disable the
commands for clients 1 to 19.
0 = Disable, 1 = Enable
MBTCP.STATUS.GeneralStatus.
EventSeqReady Bit mapped (1 bit per client 0 to 19)
Bit = 0, no event sequence status data ready
Bit = 1, event sequence status data ready
MBTCP.STATUS.GeneralStatus.
MNetRequestCount Increments each time an encapsulated Modbus TCP/IP (Service
port 2000) request is received.
MBTCP.STATUS.GeneralStatus.
MNetResponseCount Increments each time an encapsulated Modbus TCP/IP (Service
port 2000) response message is sent.
MBTCP.STATUS.GeneralStatus.
MnetErrorSent Increments each time an error is sent from a server on service
port 2000.
MBTCP.STATUS.GeneralStatus.
MNETErrorReceived Increments each time an error is received from a server on
service port 2000.
MBTCP.STATUS.GeneralStatus.
MBAPRequestCount Increments each time a MBAP (Service port 502) request is
received.
MBTCP.STATUS.GeneralStatus.
MBAPResponseCount Increments each time a MBAP (Service port 502) response
message is sent.
MBTCP.STATUS.GeneralStatus.
MBAPErrorSent Increments each time an error is sent from the server on service
port 502.
MBTCP.STATUS.GeneralStatus.
MBAPErrorReceived Increments each time an error is received from a server on
service port 502.
MBTCP.STATUS.GetEventDataStatus
This array contains the status of the event command last executed.
Tag Name Description
MBTCP.STATUS.GetEventData
Status.ClientRecordsCount Number of clients contained in block (0 to 19)
MBTCP.STATUS.GetEventData
Status.Status Two words per client.
Word 1 = Client (0 to19)
Word 2 = Error code for last executed command for
corresponding client
5.3.5 MBTCP.UTIL
The array is used for internal ladder processing. It should not be modified.
Tag Name Description
MBTCP.UTIL.ReadDataSizeGet Holds Read Data array size
MBTCP.UTIL.WriteDataSizeGet Holds Write Data array size
MBTCP.UTIL.ReadDataBlkCount Number of Read Data blocks – this value is the Read Register
Count divided by the Block Transfer Size