Nikon D5 User Manual
Page 172
150
Z
A
Exposure and Flash Bracketing
In continuous low speed, continuous high speed, and quiet continuous
modes, shooting will pause after the number of shots specified in the
bracketing program have been taken. Shooting will resume the next
time the shutter-release button is pressed. In self-timer mode, the
camera will take the number of shots selected in Step 1 on page 147
each time the shutter-release button is pressed, regardless of the option
selected for Custom Setting c3 (Self-timer) > Number of shots
(
0 303); the interval between shots is however controlled by Custom
Setting c3 (Self-timer) > Interval between shots. In other modes, one
shot will be taken each time the shutter-release button is pressed.
If the memory card fills before all shots in the sequence have been
taken, shooting can be resumed from the next shot in the sequence
after the memory card has been replaced or shots have been deleted to
make room on the memory card. If the camera is turned off before all
shots in the sequence have been taken, bracketing will resume from the
next shot in the sequence when the camera is turned on.
A
Exposure Bracketing
The camera modifies exposure by varying shutter speed and aperture
(programmed auto), aperture (shutter-priority auto), or shutter speed
(aperture-priority auto, manual exposure mode). If On is selected for
ISO sensitivity settings > Auto ISO sensitivity control (
modes P, S, and A and no flash is attached, the camera will modify
exposure by varying ISO sensitivity and only vary shutter speed and/or
aperture if the limits of exposure system are exceeded. Custom Setting
e6 (Auto bracketing (mode M),
0 307) can be used to change how the
camera performs exposure and flash bracketing in manual exposure
mode. Bracketing can be performed by varying flash level together
with shutter speed and/or aperture, or by varying flash level alone.