Nikon D5 User Manual

Page 383

Advertising

361

Live view ends unexpectedly or does not start

: Live view may end automatically to

prevent damage to the camera’s internal circuits if:
• The ambient temperature is high
• The camera has been used for extended periods in live view or to record

movies

• The camera has been used in continuous release modes for extended

periods

If live view does not start when you press the

a button, wait for the

internal circuits to cool and then try again. Note that the camera may feel
warm to the touch, but this does not indicate a malfunction.
Image artifacts appear during live view

: “Noise” (randomly-spaced bright pixels,

fog, or lines) and unexpected colors may appear if you zoom in on the view
through the lens (

0 47) during live view; in movies, the amount and

distribution of randomly-spaced bright pixels, fog, and bright spots are
affected by frame size and rate (

0 67). Randomly-spaced bright pixels,

fog, or bright spots may also arise as a result of increases in the
temperature of the camera’s internal circuits during live view; exit live view
when the camera is not in use.
Can not measure white balance

: Subject is too dark or too bright (

0 169).

Image can not be selected as source for preset white balance

: Image was not created

with D5 (

0 176).

White balance bracketing unavailable

• NEF (RAW) or NEF+JPEG image quality option selected for image quality

(

0 92).

• Multiple exposure mode is in effect (

0 229).