Nikon D500 User Manual

Page 105

Advertising
background image

79

A

During Shooting

During shooting,

Q will flash and the

time-lapse recording indicator will be
displayed in the control panel. The time
remaining (in hours and minutes) appears in
the shutter-speed display immediately
before each frame is recorded. At other times, the time remaining can
be viewed by pressing the shutter-release button halfway. Regardless
of the option selected for Custom Setting c2 (Standby timer,

0 296),

the standby timer will not expire during shooting.

To view current time-lapse movie settings or
end shooting (

0 78), press the G button

between shots. While shooting is in
progress, the time-lapse movie menu will
show exposure smoothing, the interval, and
the time remaining. These settings can not
be changed while shooting is in progress,
nor can pictures be played back or other menu settings adjusted.

A

Image Review

The

K button can not be used to view pictures while shooting is in

progress, but the current frame will be displayed for a few seconds
after each shot if On is selected for Image review in the playback
menu (

0 282). Other playback operations can not be performed while

the frame is displayed.

A

Release Mode

Regardless of the release mode selected, the camera will take one shot
at each interval. The self-timer can not be used.

A

See Also

The Beep option in the setup menu controls whether a beep sounds
when shooting is complete (

0 306).

Advertising
This manual is related to the following products: