Nikon D500 User Manual

Page 184

Advertising
background image

158

❚❚ Canceling Bracketing

To cancel bracketing, press the BKT button and rotate the main
command dial until the number of shots in the bracketing
sequence is zero (

r) and d is no longer displayed. The

program last in effect will be restored the next time bracketing is
activated. Bracketing can also be cancelled by performing a
two-button reset (

0 230), although in this case the bracketing

program will not be restored the next time bracketing is
activated.

A

ADL Bracketing

In continuous low speed, continuous high speed, and quiet
continuous modes, shooting will pause after the number of shots
specified in the bracketing program have been taken. Shooting will
resume the next time the shutter-release button is pressed. In self-
timer mode, the camera will take the number of shots selected in Step
1 on page 155 each time the shutter-release button is pressed,
regardless of the option selected for Custom Setting c3 (Self-timer) >
Number of shots (

0 296); the interval between shots is however

controlled by Custom Setting c3 (Self-timer) > Interval between
shots
. In other modes, one shot will be taken each time the shutter-
release button is pressed.

If the memory card fills before all shots in the sequence have been
taken, shooting can be resumed from the next shot in the sequence
after the memory card has been replaced or shots have been deleted
to make room on the memory card. If the camera is turned off before
all shots in the sequence have been taken, bracketing will resume from
the next shot in the sequence when the camera is turned on.

Advertising
This manual is related to the following products: