Nikon D500 User Manual

Page 272

Advertising
background image

246

3

Start shooting.
Highlight Start and press

J. The first

series of shots will be taken at the
specified starting time, or after about
3 s if Now was selected for Start
options
in Step 2. Shooting will
continue at the selected interval until
all shots have been taken.

A

During Shooting

During interval timer photography, the

Q

icon will flash in the control panel.
Immediately before the next shooting
interval begins, the shutter speed display
will show the number of intervals remaining,
and the aperture display will show the number of shots remaining in
the current interval. At other times, the number of intervals remaining
and the number of shots in each interval can be viewed by pressing
the shutter-release button halfway (once the button is released, the
shutter speed and aperture will be displayed until the standby timer
expires).

Settings can be adjusted, the menus used, and pictures played back
while interval timer photography is in progress. The monitor will turn
off automatically about four seconds before each interval. Note that
changing camera settings while the interval timer is active may cause
shooting to end.

A

Release Mode

Regardless of the release mode selected, the camera will take the
specified number of shots at each interval.

Advertising
This manual is related to the following products: