Sony ZV-1F Vlogging Camera (Black) - Manual (Page 43)

43
during normal continuous recording, simultaneous
recording and relay recording are not available.
• When you start recording in 2-slot Simul Rec mode, if
media is inserted in only one slot or the media in one
slot is full, video is recorded only on the recordable
media.
To exit, stop the recording.
To cancel 2-slot Simul Rec mode
In recording standby mode, set Simul Rec
>Setting in the Recording menu to Off.
Changing the setting of the record button
and handle record button
You can start/stop recording on the memory card
in each slot independently by using the grip
record button and handle record button.
The default setting starts/stops recording on
memory card A and memory card B
simultaneously by using either of the buttons.
• Rec Button:
Handle Rec
Button:
To change the setting
Select Simul Rec >Rec Button Set in the
Recording menu.
This function allows you to record a 4K (QFHD)
video (main clip) and MPEG HD422 video
(subclip), that can be used for pre-editing,
simultaneously to a single memory card.
Note
• The MPEG HD upgrade license (option) is required to
use this function.
The following recording formats for memory
cards are supported for 4K & HD (Sub)
recording.
Note
• Use SDXC UHS-I U3 or higher memory cards. Other
types of memory cards may not record normally.
Configuring before shooting
Configure 4K & HD (Sub) Rec (page 104) in the
Recording menu before shooting.
Notes
• 4K & HD (Sub) Rec cannot be set to On at the same
time as Interval Rec, Clip Continuous Rec, Picture
Cache Rec, S&Q Motion, 2-slot Simul Rec, or Proxy
Rec. When 4K & HD (Sub) Rec is set to On, these
other recording modes are forcibly set to Off.
• The 4K & HD (Sub) recording function cannot be set
during recording, playback, or while the thumbnail
screen is displayed.
• The 4K & HD (Sub) recording function cannot be used
when the system frequency is set to 59.94 or 50. Set to
29.97, 25, or 23.98.
Recording in 4K & HD (Sub) recording
mode
Start the recording after completing the required
setting.
Press the record button.
During recording, “XAVC-L/Sub” is displayed
on the right of the recording format (codec)
indicator on the screen.
To exit, stop the recording.
To cancel 4K & HD (Sub) recording mode
In recording standby mode, set 4K & HD (Sub)
>Setting in the Recording menu to Off.
Rec Button Set Buttons and memory
cards
Rec Button:
Handle Rec
Button:
Starts/stops simultaneously
recording to memory cards A
and B using either button.
Rec Button:
Handle Rec
Button:
Starts/stops recording on
memory card A by using the
record button, and memory
card B by using the handle
record button.
Rec Button:
Handle Rec
Button:
Starts/stops recording on
memory card B by using the
record button, and memory
card A by using the handle
record button.
4K & HD (Sub) recording
Recording
format of main
clip System
frequency Recording
format of
subclip
XAVC-L
3840×2160P 29.97/25/
23.98 MPEG HD422
1920×1080P