Microphone – Pioneer Dj DJM-A9 4-Channel Digital Pro-DJ Mixer with Bluetooth (Black) User Manual
Page 35
35
Microphone
•
You can change the talkover mode setting and attenuation level in [
TALKOVER
] in
[
MY SETTINGS
4.
MIC FX buttons
Select an effect to apply to the microphone sound. The selected button lights up.
— [ECHO]
: Outputs a delay sound several times while attenuating it to add an echo
effect.
— [PITCH]
: Changes the pitch of the microphone sound.
— [MEGAPHONE]
: Changes the microphone sound so it sounds like you’re talking
through a megaphone.
5.
MIC FX PARAMETER knob
Adjusts the quantitative parameters for the effect selected with the [
MIC FX
] button.
6.
MIC REVERB button
Turns the microphone reverb on and off. The button lights up when it’s turned on.
7.
MIC REVERB PARAMETER knob
Adjusts the quantitative parameters for the reverb applied to the microphone sound.
8.
BEAT FX indicator
Lights up when the [
CH SELECT
] button in the Beat FX section is set to [
MIC
], and blinks
when Beat FX is applied to the microphone sound.
9.
MIC button
Turn the microphone on and off. The button lights up when it’s turned on.
•
If you press and hold the button, the microphone turns on while the button is pressed
and turns off when the button is released (Push-to-talk function).
10.
MIC 1 PHANTOM ON/OFF button
Press and hold to turn phantom power on and off. The button lights up when it’s turned
on and DC+48 V phantom power is supplied to the XLR plug of the [
MIC 1
] terminal.
•
Turn phantom power on when you use a condenser microphone.
•
If the button doesn’t light up when it’s turned on, the phantom power function is
locked. You can unlock it with [
MIC PHANTOM LOCK
] in the Utility settings