Pioneer Dj DJM-A9 4-Channel Digital Pro-DJ Mixer with Bluetooth (Black) - Manual (Page 36)

36
Microphone
Using a microphone
1 Connect a microphone to the [MIC 1] or [MIC 2] terminal.
Read more: Connecting to the input terminals (page 20)
2 Press the [TALKOVER] button to turn the microphone talkover
on or off.
3 Press the [MIC] button to turn the microphone on or off.
4 Turn the [LEVEL 1] or [LEVEL 2] knob to adjust the
microphone volume level.
• Note that turning the knob too far clockwise outputs the sound at a high volume.
5 Turn the [EQ (HI, LOW)] knobs to adjust the volume of each
band.
6 Speak into the microphone.
7 To add an effect to the microphone sound, press one of the
[MIC FX] buttons.
CAUTION
Do not turn phantom power on except when you have a condenser microphone that
requires phantom power connected to the [
MIC 1 ] terminal.
Turn phantom power off before connecting or disconnecting a microphone to/from the
[
MIC 1 ] terminal. If used improperly, the unit may be damaged.
Only turn phantom power on or off when the [ MIC ] button is turned off or when the MIC
[ LEVEL 1 ] knob is set to the minimum. If phantom power is used improperly, the
monitor device may generate a large amount of noise, which may cause device failure
or even hearing loss.