Pioneer Dj DJM-A9 4-Channel Digital Pro-DJ Mixer with Bluetooth (Black) - Manual (Page 60)

60
Bluetooth
Pairing with a Bluetooth device
1 Press and hold the [BLUETOOTH PAIRING] button for
approximately 2 seconds.
The unit enters pairing state.
• The Bluetooth indicator blinks while the unit is in pairing state (for approximately 2
minutes).
2 Perform the pairing procedure on a Bluetooth device.
The Bluetooth indicator on the unit stops blinking and lights up when the connection is
established.
• Perform the pairing procedure on a Bluetooth device while the unit is in paring state. If
the unit can’t pair with a Bluetooth device within 2 minutes, the Bluetooth indicator
turns off.
• For details on the pairing procedure for the Bluetooth device, refer to the device’s
instruction manual.
• If you use a Bluetooth device registered to the unit, you can connect the unit with the
device by pressing the [
BLUETOOTH PAIRING ] button briefly.
• You can only connect the unit to 1 Bluetooth device at a time. If the unit pairs with a
second device, the registration of the first device will be lost. To register the first
device again, perform pairing with the device.