Settings, Auto standby, Sound check menu – Pioneer Dj DJM-A9 4-Channel Digital Pro-DJ Mixer with Bluetooth (Black) User Manual
Page 84
84
Settings
SOUND CHECK menu
Read more: Sound check (page 87)
*:
Factory setting
Auto standby
When [
AUTO STANDBY
] is set to [
ON
], the unit enters standby mode after 10 hours without
being used in the following ways.
–
No audio signals are input to the channels on the unit.
–
There is no PRO DJ LINK connection.
Press the [
QUANTIZE/UTILITY (WAKE UP)
] button to exit standby mode.
•
The factory setting is [
ON
].
•
Set [
AUTO STANDBY
] to [
OFF
] if you don’t need to use the auto standby function.
Setting items
Description
SOURCE
Sets a signal type (white noise/sine wave) to generate.
•
Setting values:
NOISE
*,
SINE
•
The [
NOISE
] setting generates white noise.
•
The [
SINE
] setting generates a sine wave.
•
When set to [
SINE
], you can use the X-PAD to set a
predetermined frequency.
STEREO
Sets a channel (left or right) to generate a signal.
•
Setting values:
L
,
L+R
*,
R
•
The [
L
] setting generates signals in the left channel.
•
The [
L+R
] setting generates signals in the left and right
channels.
•
The [
R
] setting generates signals in the right channel.
VOLUME
Adjusts the volume of sound check signals.
OUTPUT
Selects where the signals are output to.