Pioneer Dj DJM-A9 4-Channel Digital Pro-DJ Mixer with Bluetooth (Black) - Manual (Page 45)

45
Multi I/O
Using Multi I/O
1 According to the method you use, set the [INSERT SOURCE]
selector switch or the input selector switch for each channel.
• When you use the Insert method:
– If using an external effects unit: Set the [ INSERT SOURCE ] selector switch to
[ RETURN ].
– If using a mobile device: Set the [ INSERT SOURCE ] selector switch to [ USB ].
• When you use the Return method:
– If using an external effects unit: Set the input selector switch for each channel to
[
RETURN ].
– If using a mobile device: Set the input selector switch for each channel to [ USB ].
Read more: Channel section/master section/fader curve section (page 24)
2 Turn the [SEND CH] selector switch to select a channel to add
the MULTI I/O effect to.
3 When using the Insert method, press the [INSERT] button to
turn it on.
4 Turn the [SEND LEVEL] knob to adjust the send level for
MULTI I/O.
• Press the [ INSERT ] button again to turn the Insert method off.
• MULTI I/O turns off automatically in the following situations:
• A channel from [ 1 ] to [ 4 ] is selected with the [ SEND CH ] selector switch, and [ RETURN ]
is selected with the input selector switch for the selected channel.
• [ CF.A ] (crossfader A) or [ CF.B ] (crossfader B) is selected with the [ SEND CH ] selector
switch, [ RETURN ] is selected with the input selector switch for the selected channel,
and the settings selected with the [ CROSSFADER ASSIGN (A, THRU, B) ] selector
switch and the [ SEND CH ] selector switch are same.
• [ MASTER ] is selected with the [ SEND CH ] selector switch, and [ RETURN ] is selected
with the input selector switch for any channel.