Pioneer Dj DJM-A9 4-Channel Digital Pro-DJ Mixer with Bluetooth (Black) - Manual (Page 97)

97
Additional information
• Select this unit in the audio output device settings in the software. For details, refer to the
instruction manual for the software.
• Set the input selector switch to [ A ] or [ B ].
 Sound is distorted when a turntable is connected to the
[PHONO] terminals on the unit.
The status of the channel level indicator doesn’t change when
you turn the [TRIM] knob.
• Check if the connected turntable has a built-in phono equalizer (if it does, connect the
turntable to the [
LINE ] terminals).
• If the turntable has a PHONO/LINE selector switch, set it to PHONO.
• If the audio interface for PC/Mac, which is connected between the unit and the turntable, is
a line-level device, connect the turntable to the [
LINE ] terminals.
Bluetooth
 The unit can’t connect with a Bluetooth device.
• Turn on the unit and the Bluetooth device again, and perform the pairing procedure.
 Sound is interrupted.
• If the unit and the Bluetooth device is placed far apart, bring them closer together.
• If there is an obstacle between this unit and the Bluetooth device, remove it.
Wireless LAN (Wi-Fi)
 The unit can’t connect to a Wireless LAN using WPS.
• Check if the wireless router (access point) supports WPS. If it doesn’t, try other connection
methods.
 The unit can’t connect to an access point.
• Check if the network (SSID), password, and encryption method are set correctly. Match the
settings on this unit with the network settings.