Sequential Take 5 Compact Synthesizer - Manual (Page 14)

5 Take 5 User’s Guide Setting Up the Take 5
To choose a program:
1. Hold down the bank button then press a program selector (1-8)
button to specify the “hundreds” bank of the program.
2. Release the bank button and press a program selector button (1-16)
to select one of the 16 presets in the chosen bank.
To choose program 512, for example:
1. Hold bank and press 5. Release the bank button.
2. Press program selector button 12.
Using the Main Display
The most frequently used controls on the Take 5 are on its front panel.
But there are additional Global settings and Program-specific settings
accessible in its main display.
For example, pressing the
program
settings button gives you access to
several program-related parameters such as pitch bend wheel range,
unison detuning, envelope delay time, and more. You can select and edit
these additional parameters using
select
and
value
knobs located below
the display.
The
select
knob is for scrolling through the list of available parameters
and commands. The
value
knob is for setting values.
120
Basic Program
1/16
BBD Up+Down
The main display