Sequential Take 5 Compact Synthesizer - Manual (Page 84)

75 Take 5 User’s Guide Appendix D: Calibrating the Take 5
Appendix D: Calibrating the Take 5
Because the Take 5 is calibrated at the factory, controls such as the Pitch
and Mod wheels, Touch Slider, and analog filters shouldn’t require
re-calibration. But if you experience unexpected behavior with these
controls, you can use the calibration function to tune them occasionally.
Calibrating the VCOs and Filters
To calibrate the VCOs and filters:
1. Press the
global
button.
2. Use the
select
knob to select
cal voices
, then press
write
.
3. The synthesizer performs its auto-calibration procedure. Don’t turn off
the power while it’s doing this.
4. When finished, the front panel controls will return to normal and you
can play the Take 5 again.
Calibrating the Pitch and Mod Wheels
To calibrate the Pitch and Mod wheels:
1. Press the
global
button.
2. Use the
select
knob to select
cal wheels
, then follow the instructions in
the display.
3. When finished, press the
global
button again to exit the
global
menu.
You can now can play the Take 5 again.
Resetting the Global Parameters
If you’re trying to track down a problem, it’s sometimes a good idea to
reset the Global parameters to their defaults. This is a quick way to make
sure that the Take 5 returns to its factory settings.
To reset all Global parameters to their default settings:
1. Press the
global
button.
2. Use the
select
knob to select
reset globals
, then press
write
. Globals are
reset. You can now can play the Take 5 again.