Sequential Take 5 Compact Synthesizer - Manual (Page 50)

41 Take 5 User’s Guide Effects
To add an Effect:
1. Press the
effect on
/
off
button to turn it on.
2. Turn the
type
knob to select an effect. The effect name is shown in the
lower right of the main display. Names are abbreviated. For instance
“bbd” is the bucket-brigade delay. Refer to the previous list.
3. Turn the
depth
/
mix
knob clockwise to blend in the processed signal.
4. Use the
time
and
feedback
/
misc
knobs to adjust effect parameters. Refer to
the chart to see which parameters each of these knobs control
To add Reverb:
1. Press the
reverb on
/
off
button to turn it on.
2. Turn the
mix
knob clockwise to blend in the processed signal.
3. Use the
decay
knob to adjust the length of the reverb tail.
4. Use the
pre
-
delay
knob to adjust the pre-delay.
5. Use the
tone
knob to shape the frequency content of the reverb. The
tone
parameter uses both high-pass and low-pass filtering to sculpt the reverb’s
sound.
6. Use the
damping
knob to adjust reverb damping (absorption of the high
frequencies of the reverb). Less damping allows high frequencies to decay
slower to create a brighter reverb sound. More damping darkens the sound
of the reverb.