Sequential Take 5 Compact Synthesizer - Manual (Page 86)

77 Take 5 User’s Guide Appendix D: Calibrating the Take 5
4. On the Take 5 that you want to send the programs from, in the
global
menu select
dump preset
,
dump bank
, or
dump all banks
, depending on
which of these you would like to do.
5. Press
write
. The program or bank is exported to the other Take 5.
Dumped programs will load back into the same bank and program location in
memory when received by the Take 5 via MIDI.
Importing Programs and Banks
You can use a MIDI librarian application such as such as SysEx Librar-
ian for Macintosh, or MIDI-OX for Windows to transmit exported
program or banks back into your Take 5. You will need a computer and
an appropriate software application.
To import a program or bank as a SysEx file over MIDI:
1. Connect your synthesizer to a computer using a USB cable (or MIDI
cable, if you are using a dedicated MIDI interface).
2. Press the
global
button on the Take 5.
3. Use the
select
knob to select
midi sysex cable
, then use the value
knob to choose
usb
or
midi
, depending on which port you are using to
connect to your computer.
4. Open your MIDI librarian software and configure it to send SysEx
messages to your Take 5.
5. In the MIDI librarian, open the programs and/or banks you want to send.
6. Transmit the programs. The Take 5 should load them. They will replace
any existing programs in those same memory locations on the synth.
Programs will load back into the same bank and program locations from which
they were originally exported.