Sequential Take 5 Compact Synthesizer - Manual (Page 63)

54 Pitch and Mod Wheels Sequential
Pitch and Mod Wheels
The Take 5 has a spring-loaded Pitch wheel and a Mod wheel. You can
use these controls to enhance live performance by bending notes and
adding modulation in real time as you play.
PITCH MOD
The Pitch and Modulation wheels
Pitch Wheel
You can set a range in semitones for the Pitch wheel, depending on your
playing preference. The upward range is 12 semitones (1 octave). The
downward range is 24 semitones (2 octaves). Many musicians use a
range of 2 semitones (a whole step) since this is the bend range of many
acoustic instruments. For guitar whammy bar effects, you many wish to
set a wider range.
To set the pitch bend range:
1. Press the
program
button.
2. Use the select knob to locate the pitch bend up parameter.
3. Use the value knob to choose a bend interval.
4. Hold a note and move the Pitch wheel to hear the effect.
5. Once you’ve set the bend up interval as desired,
use the select knob to
locate the pitch bend down parameter.
6. Use the value knob to choose a bend interval.
7. Hold a note and move the Pitch wheel to hear the effect.
8. Once you’ve chosen the desired mode, press the
write
button twice to
save the program.