Sequential Take 5 Compact Synthesizer - Manual (Page 29)

20 Global Settings Sequential
Mixer
The Mixer section is where you set the levels of the various sound gener-
ators on the Take 5. These include oscillators 1 and 2, the sub oscillator
and the noise generator. You must turn up at least one of these sources
in order to make sound with the Take 5. Alternatively, you can make the
filter generate its own sine wave by turning up
resonance
all the way so
that it self-oscillates.
OSC 1 SUB OSC 1
OSC 2 NOISE
The Mixer section
Mixer Parameters
Osc 1: Sets the output level of oscillator 1.
Osc 1 Sub: Sets the output level of the sub oscillator.
Osc 2: Sets the output level of oscillator 2.
FM 2 -1: When on, applies frequency modulation from Oscillator 2
to Oscillator 1. The Oscillator 2
level
knob controls the amount. Use
frequency modulation to create complex harmonics and metallic textures
by tuning Oscillator 2 to different intervals.
Noise: Sets the output level of the white/pink noise generator. Rotating
the knob clockwise from 0 increases the level of white noise. Rotating
the knob counter-clockwise from 0 increases the level of pink noise.