Sequential Take 5 Compact Synthesizer - Manual (Page 28)

19 Take 5 User’s Guide Global Settings
Additional Oscillator Parameters (Program Menu)
Additional oscillator parameters are accessible by pressing the front-
panel
program
button and scrolling through the list that appears.
Osc 1 Key Follow: Off, On— When on, oscillator 1 tracks the keyboard
or note data received via MIDI. When off, the oscillator plays at its base
frequency setting, though its pitch may be affected by modulation from other
sources.
Osc 2 Key Follow: Off, On— When on, oscillator 2 tracks the keyboard
or note data received via MIDI. When off, the oscillator plays at its base
frequency setting, though its pitch may be affected by modulation from other
sources.
Osc 1 Glide: 0...127 —Sets oscillator 1 glide ( portamento ) amount. Glide
causes the pitch of a note to glide smoothly up or down from the pitch of
the previously played note. It can be set independently for each oscilla-
tor. Low values are shorter/faster. The
glide
switch must be on to hear
the effect of
glide rate
. For a detailed explanation, see “Glide” on page
52.
Osc 2 Glide: 0...127 —Sets oscillator 2 glide ( portamento ) amount. Glide
causes the pitch of a note to glide smoothly up or down from the pitch of
the previously played note. It can be set independently for each oscillator.
Low values are shorter/faster. The
glide
switch must be on to hear the
effect of
glide rate
. For a detailed explanation, see “Glide” on page 52
Osc 1 Fine Freq: Fine tune control with a range of 7 semitones (a major
5th) up or down. The 12 o’clock position is centered.
Osc 2 Fine Freq: Fine tune control with a range of 7 semitones (a major
5th) up or down. The 12 o’clock position is centered.