LG ProBeam BU70QGA 7000-Lumen 4K Laser SmProjector - Manual (Page 87)

32
ENGLISH
[Energy Saving]
• [Brightness Control]: Adjust the brightness of the screen to save energy.
- Minimum/Medium/Maximum: Use energy saving according to the energy saving level set for the Projector.
NOTE
• Return to default settings by clicking [Admin] -> [Factory Reset].
[HDMI IT Content]
Set the HDMI IT Contents function.
• [Off]: Disable the HDMI IT Contents function.
• [On]: Enable the HDMI IT Contents function.
This feature automatically changes the Projector’s picture mode based on HDMI Contents information when an HDMI
signal is entered.
Even if the Projector’s picture mode has been changed by the HDMI IT Contents feature, you can change the picture
mode again manually.
As this has a higher priority than the picture mode set by the user, the existing picture mode may be changed when
the HDMI signal changes.