BenQ GV30 300-Lumen HD DLP LED SmPico Projector - Manual (Page 24)

24
Installing/Replacing the remote control batteries
Before you can begin to use the remote control, you must install the supplied batteries into the remote control.
1. Slide the battery cover outwards.
2. Insert the batteries in the orientation shown below.
3. Slide the battery cover back onto the remote control.
When sliding the battery cover, do not try to pull the cover too hard as it is tethered to the remote control by a plastic band and cannot be completely removed.
Avoid leaving the remote control and battery in an excessively hot or humid environment like the kitchen, bathroom, sauna, sunroom or in a closed car.