BenQ GV30 300-Lumen HD DLP LED SmPico Projector - Manual (Page 25)

25
Remote control effective range
The projector has an IR remote control sensor located at the front of the projector with a range of 8 meters (~26 feet) at an angle of 30 degrees (left
and right) and 20 degrees (up and down). Prior to remote control pairing process during the setup wizard (see for
Starting up the projector on page
31 details), the remote control can only be used either by pointing it directly at the IR sensor or by reflecting the IR signal off of a wall/screen, making
sure that there are no obstacles between the remote control and the IR sensor on the projector.
Once the remote control has been paired to the ATV dongle installed in the projector, you will be able to use it at any angle within a range of 7 meters
(~23 feet).
Voice input and Google Assistant functionality on the remote control is only available after the remote control has been paired to the projector during the setup wizard
process. See
Starting up the projector on page 31 for more details.