System – BenQ GV30 300-Lumen HD DLP LED SmPico Projector User Manual
Page 59
59
System
The following table describes the items available in the
System
menu:
Item
Options and descriptions
Language
Sets the language for the projector.
Changing the language setting in this menu will not change the language used in
Android TV
. To change
Android TV
’s language use the settings
menu on the home screen.
Auto Power Off
When Idle /
Power Off
Timer When
Power Saving
Enables/Disables the automatic shutting off of the projector after the amount of time configured (
5mins
,
10mins
,
15mins
,
20mins
,
25mins
, and
30mins
). See
Setting the projector to power saving mode on page 35
for information on power saving
mode.
System Update
Allows you to update the software on the projector via a USB flash drive. This is for service use only.
System
Information
Displays hardware/software information for the projector including its device name and serial number.
Projector
Information
Displays information on the current status of the projector including the current
Detected Resolution
,
Source
,
Picture
Mode
,
Power Mode
,
Color System
,
Light Usage Time
,
Firmware Version
, and
Service Code
.
Factory Reset
Returns the projector to its factory default state.