BenQ GV30 300-Lumen HD DLP LED SmPico Projector - Manual (Page 51)

51
Bluetooth connections
The projector allows the following types of Bluetooth connections:
• Connect a mobile device to the projector to broadcast audio through the projector’s speakers.
• Connect to a Bluetooth-enabled speaker or headphones to output audio directly for greater sound.
Using the projector as a Bluetooth speaker
1. Make sure the ATV dongle is installed properly (see Installing the ATV dongle on page 29 ).
2. Power on the projector (see Starting up the projector on page 31 ).
3. Press the Bluetooth button on the top side of the projector. The projector will stop projecting and switch over to Bluetooth speaker mode.
4. Pair your external device to the projector.
After you have successfully paired your mobile device with the projector, pairing information will be stored on both devices and a connection will
automatically be made when Bluetooth is enabled on both devices and both devices are within range of each other.
You may also enable Bluetooth speaker mode by pressing the source button on the remote control and selecting BT Speaker .
If you are unable to activate Bluetooth mode or if the Bluetooth LED does not illuminate, shut off the projector and check to see if the ATV dongle is properly installed. See
Installing the ATV dongle on page 29 for details.