BenQ GV30 300-Lumen HD DLP LED SmPico Projector - Manual (Page 35)

35
Shutting down the projector
1. Press and hold the power button on the projector or remote control for over 3 seconds and the projector will shut down directly.
2. The power LED will flash a breathing green pattern (see
LED indicators on page 19 ). The fans may continue to run in order to cool the system.
If the projector will not be used for an extended period, unplug the power cable from the power outlet and remove the batteries from the remote
control.
Setting the projector to power saving mode
To save power, you can set the projector and the ATV dongle to power saving mode when they are not in use.
1. Press the power button on the projector or remote control to bring up the power menu.
I I
3 seconds 3 seconds
or