BenQ GV30 300-Lumen HD DLP LED SmPico Projector User Manual
Page 64
64
Picture is blurred.
The projection lens is not correctly focused.
Adjust the focus of the lens using focus button on the
remote control.
The projector and the screen are not
aligned properly.
Adjust the projection angle and direction as well as the
height of this projector if necessary.
Remote control does not work correctly.
The batteries are out of power.
Replace both of the batteries with new ones.
There is an obstacle between the remote
control and the projector.
Remove the obstacle.
You are too far away from the projector.
Stand within 8 meters (26.2 feet) of the projector.
The projector cannot connect to the desired
SSID.
The handshaking between the projector and
the router does not follow IEEE 802.11
protocols.
• For 2.4G frequency, make sure the wireless mode of
the router is configured as 802.11g/n or 802.11n.
• For 5G frequency, make sure the wireless mode of
the router is configured as 802.11n.
Problem
Cause
Remedy