Charging the battery – BenQ GV30 300-Lumen HD DLP LED SmPico Projector User Manual
Page 30
Advertising
30
Charging the battery
1. Connect the adapter to the power adapter port.
2. Connect the power cord to the power adapter.
3. Connect the power cord to a power outlet.
The power LED indicator will illuminate according to its charge status, for a full charge wait until the indicator lights up solid green (see
for more information on LED behavior). It takes about 3.5 hours.
• The projector also supports charging via a power bank of USB Power Delivery capability with output power of at least 45W (15V, 3A).
• When charged, the projector is able to supply power via both its USB-C (5V, 1.5A) port.
2
1
3
Advertising