BenQ GV30 300-Lumen HD DLP LED SmPico Projector - Manual (Page 37)

37
Adjusting the projected image
Adjusting the projection angle
The projector features a magnetic base that holds the projector and allows you to adjust the projection angle.
Place the projector properly on the base and rotate the projector to adjust the projection angle.
• The maximum angle of adjustment is 135 degrees.
• If the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this, see
Correcting keystone on page 39 for
details.
When the projector is on, DO NOT place down the projector with its left or right vents facing down as this will block the vents.
90
-45