BenQ GV30 300-Lumen HD DLP LED SmPico Projector - Manual (Page 52)

52
Ending the Bluetooth connection
In cases where you want to disconnect the mobile device from the projector, either:
• Disconnect from the projector in the Bluetooth menu of your mobile device.
• Press the Bluetooth button on the projector to return the projector to projector mode.
• Press and hold the power button on the projector or remote control to power off the projector.
Pairing/Connecting to a Bluetooth speaker or headphones
The Bluetooth function for a GV30 projector is built in the Android system, whose hardware is independent of other input sources like HDMI. Thus,
the Bluetooth function will only be available when using the projector’s built-in Android as an input source. In other words, due to current hardware
limitations, the projector won’t be able to transmit audio using HDMI to external Bluetooth speakers. If you have any further questions, please contact
your local customer care team for more assistance.
1. Make sure the ATV dongle is installed properly (see Installing the ATV dongle on page 29 ).
2. Power on the projector (see Starting up the projector on page 31 ).
3. Press the settings button on the remote control
4. Select
Remotes & Accessories .
5. Select Add accessory .
6. Activate Bluetooth-pairing mode on the speaker or headphones.
7. Select the speaker or headphones from the device list shown on screen.
8. Select
Pair .
When the projector and speaker or headphones have successfully connected, the device will be labelled as Connected in the Remotes &
Accessories . You can now output the audio from the ATV to the speaker or headphone.
The projector can only transmit audio from ATV via Bluetooth connection. Even when the projector is switched to other input sources, such as HDMI, as ATV is still running
in the background, it will continue to transmit audio from ATV to the connected Bluetooth speaker or headphones.