Starting up the projector, Detail, 3 seconds 1 second or – BenQ GV30 300-Lumen HD DLP LED SmPico Projector User Manual
Page 31
31
Starting up the projector
1. Install the provided ATV dongle into the ATV dongle port. See
Installing the ATV dongle on page 29
for details.
2. If you are starting up the projector for the first time, charge the battery or supply power to the projector until the power LED lights up in green
as indicated in
Charging the battery on page 30
. It takes about 3.5 hours.
3. Press the power button on the projector for 3 seconds or remote control for 1 second. The power LED will flash a breathing green pattern.
If you are starting up the projector for the first time, it is suggested that the projector is within range of a wireless access point (e.g. a router) with a stable Internet
connection as some optional steps during the setup process require Internet access.
• When supplying power directly to the projector please use the supplied power cable to avoid possible dangers such as electric shock and fire.
• Prior to pairing the remote control to your projector you must ensure that your remote control is in range of the projector’s IR sensor. See
for more details.
• Powering on via the remote control will not work if you have not completed the setup wizard procedure or if the projector’s battery level is below 5%.
I
I
3 seconds
1 second
or