Canon DP-V2421 4K Reference Display User Manual
Page 103
103
OSD Menu
Item
Setting Options (underline indicates factory default)
Power Indicator/Button LED Settings
Power
Indicator
Brightness
Adjusts the brightness of the power indicator on the main unit. The greater the number is, the greater
the brightness.
Off, 1
to
5 (3)
Display Button
LED
Sets the F buttons and the lamp on the face.
On, Off
Off (Luminance Warning On)
: When "Peak Luminance Control" is set to "On", the F button assigned
with this function will flash when display luminance is restricted, while
the other F buttons and the lamp on the face will go out.
Button Name
Lighting Time
(sec.)
Sets the time (sec) until the lamp on the face goes out if no operation is performed.
60
,
30, 10, 5
Fan Settings
Sets the operation of internal fan.
Fan Control
Fan noise can be eliminated when the main unit is used during shooting or when silent operation is
needed.
Set this in advance to stop the fan either manually or by linking it with the camera during
photography (
92). When this is set to "On", the mode changes so that the fan can be stopped.
On, Off
Fan Stop
If "Fan Stop" is set to "On" and when "Fan Control" is set to "On", the fan can be stopped. At room
temperature (25 °C), the fan remains off for approximately one minute. The fan operates at a faster
speed than usual before and after the fan is stopped to lower the internal temperature.
On, Off
Note
• If the message "Invalid operation due to high temperature." is displayed, the fan cannot be
stopped even when "On" is selected for this item. Wait until the internal temperature lowers.
• If the temperature inside the main unit increases while the fan is off, the message "Fan will be
rotated as the temperature is high." is displayed and the fan starts rotating approximately ten
seconds later. Since the temperature of the main unit has increased, the fan rotates faster than
usual.
• Select "Off" to restart the fan. The fan rotates faster than usual.
• The fan may not stop in some conditions, for example when used at a high temperature.