Canon DP-V2421 4K Reference Display - Manual (Page 60)

60 OSD Menu
Item Setting Options (underline indicates factory default)
Copy
Picture Mode When "User 1-7" is selected for "Picture Mode", the content of the selected picture mode is copied.
The following modes can be selected:
Picture Mode (Copy from) : SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB,
DCI-P3, User 1-7 (other than the currently set parameter)
Execute
: Performs copy.
Note
• In "Picture Mode" other than "User 1-7", the results of calibration performed at the factory are
copied.
Picture
Mode Name You can change the name of "User 1-7" within 24 characters including alphabetical characters,
numbers, and symbols.
Anchor Adjustment Temporarily saves parameters for adjusting "Contrast", "Brightness", "Chroma", "Sharpness", and
"HDR Range" and recover the values (anchor point setting).
OK : Performs anchor point setting.
Cancel : Returns to the previous screen without setting anchor point.
Reset Return "Picture Mode" to factory default. Note that in "User 1-7" mode where you are performing
calibration, the setting returns to the value after calibration instead of the factory default.
When selected, the message "Reset Adjustment settings to defaults?" appears.
OK : Performs reset.
Cancel : Returns to the previous screen without resetting.