Marker settings – Canon DP-V2421 4K Reference Display User Manual

Page 76

Advertising
background image

76

OSD Menu

Marker Settings

This menu is used to configure various markers.

Item

Setting Options (underline indicates factory default)

Marker Preset

Customizes markers which are assigned to markers 1 to 5.

Marker 1

to

5, Off

Aspect Marker

"Aspect Marker" displays a range in accordance with the specified aspect ratio.

Note

"Aspect Marker" is not displayed in the following cases:

• When there is no signal, unsupported signal, or a channel with "Input Configuration" not set is

selected

• When an enlarged image is displayed
• During the execution of "Playback File" under "Screen Capture"
• When a "Test Pattern" is displayed

Enable

Switches the aspect marker On, Off.

On

,

Off

Mask

Switches the mask color. Mask is the blanking area outside the range of the marker.

Black

:

Half (50% gray)

:

Off

: Turns mask off.

Aspect Ratio

Sets the aspect ratio of the aspect marker.

16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, Variable

The aspect ratio can be entered as a numeric value when you select "Variable" (0.01:1 increments). The
grayed out slider becomes active and can be used to set the aspect ratio.

1.00:1

to

3.00:1

(

1.78:1

)

Line

Active when "Black" or "Half" is selected for "Mask". Switches lines on mask On, Off.

On, Off

Line Width

Sets the thickness of the aspect marker line.

Thick, Normal, Thin

Advertising