Canon CR-X500 Outdoor 4K PTZ Camera with 15x Optical (White) User Manual
Page 16
Custom picture settings
16
[
/
!
Custom Picture
]
>
[Other Settings] Submenu (Detailed Settings)
Menu items
Setting options and additional information
[Black]
[Master Pedestal]
–50 to 50 (±0)
Increases or decreases the black level. Higher settings will make dark areas brighter but decrease contrast. When [Gamma] is
set to [Canon Log 3], this setting is not available.
[Master Black Red],
[Master Black Blue]
–50 to 50 (±0)
These settings correct the color cast in blacks. When [Gamma] is set to [Canon Log 3], these settings are not available.
[Black Gamma]
[Level]
–50 to 50 (±0)
[Range], [Point]
–20 to 50 (±0)
These settings control the lower part of the gamma curve (dark areas of the image). When [Gamma] is set to [Wide DR], [PQ],
[HLG] or [Canon Log 3], these settings are not available.
[Level]: Raises or lowers the lower part of the gamma curve.
[Range]: Selects the adjustment range from the selected [Point].
[Point]: Determines the shape of the lower part of the gamma curve.
[Low Key Satur.]
[Activate]
[On], [Off]
Set this setting to [On] to enable the adjustment of color saturation in dark areas with the [Level] setting.
[Level]
–50 to 50 (±0)
Specifies how saturated colors are in dark areas.
[Knee]
[Activate]
[On], [Off]
Set this setting to [On] to enable the adjustment of the knee point with the following settings. When [Gamma] is set to [Wide DR],
[PQ], [HLG] or [Canon Log 3], the [Knee] settings are not available.
[Automatic]
[On], [Off]
Set this setting to [On] to enable the automatic adjustment of the [Knee] settings.
[Slope]
–35 to 50 (±0)
[Point]
50 to 109 (95)
[Saturation]
–10 to 10 (±0)
These settings control the upper part of the gamma curve (highlights of the image). By compressing the highlights, you can
prevent parts of the image from being overexposed.
[Slope]: Determines the slope of the gamma curve above the knee point.
[Point]: Sets the knee point of the gamma curve.
[Saturation]: Adjusts the color saturation in the highlights.
Input
Output
[Point]
[
Range
]
[Level]
Input
Ou
tput
Ou
tput
Input
[Slope]
[Point]