Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 33)

1.3 User Types and Operations
33
Yes: Available —: Not available
Maintenance
System Update (P.174) (P.176) — — Yes (*11) Yes Yes (*12)
Add-in Software (P.178) — — Yes (*11) Yes Yes
(*12)(*13)
Technical Support (P.181) (P.182) — — Yes (*11) Yes —
Alert Notification (P.183) — — Yes Yes Yes
Device Test
Calibrate Screen (P.359) — Yes Yes — —
Scan Test (P.356) — Yes Yes — —
Job Menu Settings
Job Sequences (P.191) — — — Yes Yes
Job Menus (P.201) — — — Yes Yes
Job Groups (P.206) — — — Yes Yes
Item
Touch panel
Admin
Tool
Central
Admin
Console Wizard
Basic
mode Advanced
mode
(*1): For the operations, refer to the Scanner Central Admin User's Guide.
(*2): The [Date / Time] input field and [Get Time] button cannot be used.
(*3): Certificates cannot be imported.
(*4): Synchronization not possible.
(*5): If you set [IPv6 Function] to [On] on the window that is displayed when
[Network Advanced Settings] under [Network Settings] is selected, the menu
that is displayed on the window is switched to the menu that supports the
enabled IPv6 function.
(*6): Contents of the SSL Certificate are not shown.
(*7): [Address] and [Port Number] cannot be set.
(*8): Printers, folders and SharePoint folders that can be accessed from the Central
Admin Server can be set.
(*9): This can be viewed on the Central Admin Console [Scanner Details] window.
This cannot be viewed on the scanner settings edit window, which is displayed
by pressing the [Edit Scanner Settings] button in the Central Admin Console
[Scanner Settings] window.
(*10): When using the touch panel, only the following operations can be performed:
Clearing the user data store, system settings reset, and secure initialize