Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 367)

7.2 Network Connection Troubleshooting
367
■ Checking the Network Operating Status
Check the network status on the [Network Status] window.
For details about the checking procedure, refer to
"4.8.2 Checking the Network Operating
Status" (page 109) or "G.3.5 Checking the Network Operating Status" (page 462) .
Follow each action described below.
■ Action
None
■ Action
None
■ Action
In "4.7.8 Configuring Network Advanced Settings" (P.107) , change [Link Speed/Duplex Mode]
from "Auto-Negotiation" to a fixed mode.
If the problem persists, refer to
"Failure to Connect to a Server Using Its IP Address" (P.370) for
further solutions.
The information shown is all valid.
Network connection is working properly.
The information shown is valid, but the network connection does not
work normally for the ping test.