Epson 5500C - Manual (Page 114)

4 • Using the ELP Link III Software 104
Setting Tab
Option Description
Blank Specifies blank screen states:
Logo
The user’s logo displays briefly.
Black A black screen displays.
Blue A blue screen displays.
Color Temp Adjusts the whiteness of the screen. Positive color temperature values
provide a cold white; negative values provide a warmer white. Press the right
arrow button on the control panel or press right on the remote’s pointer
button to increase the color temperature value; press the control panel’s left
arrow button or left on the remote’s pointer button to decrease the color
temperature value.
Install Specifies how the projector is being used:
Rear Proj.
Use this setting when projecting to the back of a screen so the
image is flipped left to right.
Ceiling Use this setting when the projector is installed on the ceiling
so the image is flipped top to bottom.
Prompt Temporarily displays a prompt on the projector screen identifying which
source (computer or video) is providing the image.
Mode Specifies the input image signal mode. User can select from AUTO, NTSC,
NTSC 4.43, PAL, PAL N, PAL M, PAL 60 and SECAM.
Pattern Display Displays the test pattern currently selected.
Reset Resets all fields to their default values.
5500.book Page 104 Wednesday, August 4, 1999 4:41 PM