Epson 5500C - Manual (Page 37)

1 • Installation 28
b. Remove the small cover (as shown below) and set the DIP
switches on the Macintosh desktop adapter to select the
resolutions you want to use (such as 16-inch mode). See
your Macintosh documentation for instructions.
c. Disconnect the monitor cable from the video port on the
back of the Macintosh.
d. Connect the small terminal of the Macintosh desktop
adapter to the other end of the projector video cable and
connect the projector video cable (with Macintosh desktop
adapter attached) to the video port.
5500.book Page 28 Wednesday, August 4, 1999 4:41 PM